IP-COM W45AP Wireless N300 High Power Access Point

Price: Rp.1,102,000
Brand: IP-COM
Product Code: W45AP
Reward Points: 0
Availability: In Stock
  • 2.4GHz 300Mbps 
  • One Gigabit LAN port 
  • Compliant with PoE 802.3at


W45AP is a 300Mbps indoor ceiling access point for hotels, resorts, hospitals, office buildings, universities and other multi-building campus environments that need to extend wireless network. Adopt independent power amplifier to enhance wireless signal for client devices, such as wireless laptops, tablets and smartphones. With the aesthetic ceiling design, W45AP can be deployed easily on ceiling or in crawlspaces. Also W45AP can be deployed in areas where outlets are scarce or not available with 802.3at compliant.

Ceiling Design

With the aesthetic ceiling design, W45AP can be deployed easily on ceiling or wall.

Wireless N300 Speed

W45AP transfer rate up to 300Mbps on the 2.4GHz for faster file transfer and smoother video streaming.

Gigabit Ethernet Port

Up to 10X faster data transfer than traditional Fast Ethernet. Ideal for streaming videos, VoIP, music and multimedia applications.

Power over Ethernet (802.3at)

The port on the back panel is PoE 802.3at compliant, which allows both power and data to be carried over a single Ethernet Cable to W45AP. So the W45AP can be deployed in areas where power outlets are scarce or not available.

Industry Wireless Security

W45AP offers multi-level wireless encryption options to prevent unauthorized access and protect your important data.
1. 64/128 bit WEP, WPA-PSK, WPA2-PSK, WPA&WPA2-PSK, WPA, WPA2
2. Wireless Access Control based on the MAC address of wireless adapter

SSID to VLAN Tagging

W45AP can be configured to broadcast up to 4SSID. Each SSID can be tagged to a specified network VLAN for different user access based on established access rights.

Multiple Operating Mode

W45AP can be configured to work as Wireless Access Point, WDS, Universal Repeater mode and help you expand your network.

Centralized Management

W45AP can be managed by the hardware Access Controller, the administrator can monitor, manage and control the APs more easily.




Hardware Feature
Dimension 144.2*144.2*40.12mm
AP Type Fit/Fat AP
Interface 1*GE LAN
Antenna 2*printed antennas
Button 1*Reset
Power Method 802.3at PoE/DC 12V=1A
Maximum Power Consumption 11W
EIRP <20dBm
LED Indicator SYS
Software Feature
Compliant Standard IEEE 802.11n/g/b
Frequency Range 2.4GHz-2.483GHz
Maximum Wireless Speed 300Mbps
Wireless Basic Setting 4 SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
SSID-To-VLAN tagging 
Adjust transmit power by dBm
Wireless Security Setting 64/128 WEP
Working Mode AP,WDS,Universal Repeater
Receiver Sensitivity b mode:1M -89dBm@8% 11M -87dBm@8% PER; 
g mode:54M -74dBm@8% PER;
n mode:72.2M -72dBm@8% PER; 150M -70dBm@8% PER
LAN Setting Static IP
Dynamic IP
DHCP Server DHCP Server 
Clients list
VPN Pass-Through PPTP
Management Tool SNMP(v1&v2c)
System Log
Firmware update
Time&Date Setting
Backup/Restore Configuration
Username Managerment
Diagnostic Tool(ping)



Write a review for IP-COM W45AP Wireless N300 High Power Access Point

Note: HTML is not translated!
Bad Good